This is a frequently asked question by pool owners. It is an important question that every pool owner that values or takes care of their pool should ask.
The water level in the pool plays a huge role in how clean and safe a pool is, and it’s necessary to pay attention to it.
If the water level of your pool is too high, it can make cleaning your pool inefficient. It will not allow the skimmer to clear the path to the filter as well as it’s supposed to. Hence, it is vital to always watch out for the water level in your pool.
Like the saying, “too much of everything is bad,” so it is for low water levels in your pool too. In your bid to make sure the water level in your pool does not rise too much, do not allow it to be too low either.
If the water level is too low in a pool, it is likely to cause damage to the filter and its motor.
So, always make sure that there is balance. The water should not be too high or too low for the skimmer; it should be at the midpoint.
Is it bad for a pool to be too full?
When your pool is full, it becomes harder for the skimmer to pick up debris around the pool. This debris can also eventually block your filter and damage it.
High water levels can also make it impossible for your pool to maintain a clean state, as the level of the water makes it hard for any proper cleaning to be done in the pool.
So, you be the judge now. Do you still think a high water level is not bad for your pool? I guess not.
Can a pool have too much water in it?
Often, because of rainfall or excessive pumping of water in the pool, the water becomes too much.
Especially in areas that have record-high amounts of rainfall, the water in the pool becomes mixed with the one inside the pool and it becomes too much in the pool.
Also, pumping water into the pool without really minding if it’s reached the necessary level or not can cause the pool to be filled with too much water.
What do I do if I put too much water in my pool?
There are quite a few things you can do if your pool water level is high, but draining is not one of them. As we continue, you will find out why. will
Draining your pool because there’s too much water in it will be one of the most terrible decisions you’ll ever make.
Draining your pool takes you back to square one again. All your chemicals and everything that helps your pool stay blue and clean will be drained.
Now, having found out why you should not consider draining your pool just yet, it is better to just allow the pool to be. Evaporation and normal use will eventually return the water to its normal level.
How high should your pool water be?
Knowing what the appropriate level for your pool water is to be is very important because the water levels are also an important part of maintaining your pool.
Often, when someone not so familiar with pool science comes into contact with it, there are so many questions they intend to ask, and how high the pool should be is an integral part of these questions.
Well, as to how high your pool water should be, you aim to have your pool water sitting at the halfway point of your skimmer hatch (which sits on the side of your pool).
It is also generally advised that you have your water level between one-third and
One half up to the swimming pool skimmer box opening, anything higher than this is likely to slow the debris from being pulled to the skimmer box. This means that your pool is likely to have floating debris here and there on your pool surface.
How do I lower the water levels in my pool?
You might likely need to lower your pool level after a very heavy rainfall or after an occasion of leaving your hose in the pool even after your water might have reached the appropriate levels.
Now, here’s the gist. There are some ways that you can lower your pool water levels for the better which we’ll be looking at immediately.
- Wasting the extra water through a pool pump multi-port valve;
Start with your pump off, open the two-way valve, and move the multi-port valve to waste.
Turn the pump on and pump till you reach the desired level, then move the multi-port valve to the filter, and close the two-way valve.
- Draining by using the pump;
However, if what you use or what your pool has is a cartridge filter, there’s no need for a multi-port valve since you can easily remove and clean the cartridge. Find the drainage spot, hook a hose up to the spigot, open it, and drain until the water is at its desirable level.
- Drain water from the pool by siphoning; you can drain water from the pool with a hose, a garden hose actually by putting one side of the hose in the pool and the other side outside. By placing one end lower inside the pool and one end outside, on the surface of the pool floor, it begins to siphon the water.
Drain with caution: Now, having found ways we can reduce the water level by draining the pool, it is necessary to know that draining can also cause big problems if not done right. Draining can cause flooding if there’s no proper channel for the drained water. It can get into you or your neighbor’s home.
How do I stop my pool from overflowing in the rain?
Bad weather takes up at least 75 percent of the overflowing cases, especially for people who live in regions with massive rainfall rates.
Overflowing is likely to cause major problems not only for your pool but your home too. If your pool becomes filled up and there’s continuous water addition, it is likely to begin entering other parts of your yard, home, and neighborhood.
Stopping a pool from overflowing is not so easy, especially during rainy seasons. The best thing to do at such a point in time is to use measures that can prevent or maintain the situation.
One way a pool can be stopped from overflowing during rainy periods is if
If your pool is an indoor pool, or if you have a pool cover strong enough to cover the pool from rain.
There are other options like draining the pool a bit before the rain starts. If you’re currently in the season with heavy rainfall or you’ve observed that there’s likely to be heavy rainfall, it’s best to reduce the water level a little to accommodate the coming rain.
How do you know when your pool is full
You’ll know when your pool is full by merely looking at it, especially when the water rises above the skimmer hole in the wall. It also tells that your pool is full.
It is not rocket science to detect when a pool is full, it will be crystal clear to know by the mere sight of it.
What happens if above ground pool overflows?
The landscape you have will determine exactly what happens when an above-ground pool overflows.
Floods are mainly caused by heavy rainstorms, hurricanes, and other harsh weather conditions. These conditions often wreak havoc on the environment, and in this case, pools.
Without a proper drainage system where the overflowing water in the above-ground pool can run, your yard, house, and neighborhood might be in great danger as this water might likely run toward your living areas and damage precious belongings.
Does backwashing empty the pool?
Backwashing is a term used to describe the process of cleaning a pool filter, to get rid of debris and other contaminants in the pool that might be blocking the filter and stopping it from functioning the way it should.
Well, as the term implies, this is a process mainly for keeping the pool clean and tidy and not for emptying the pool as water will still find its way in after backwashing.
However, you can still tweak the process to a pool emptying one if you so desire but the major reason of backwashing is to keep the pool and it’s filter clean.
How do you backwash a pool to lower level water
For a lot of pools that have a sand/glass DE filter, the easiest way to lower the water level is to place the multi-port valves into the waste position and roll out the backwash hose.
Some other people have the alternative which is a hose spigot plumbed after the pump or on the filter valve that can be connected to a garden hose and lower the water level.
How often should you backwash a pool?
Backwashing a pool depends on some factors, factors as how frequently the pool is used, how often the pool gets dirty or picks up debris, etc.
Also, when your pool filter guard reads
Ten psi above the normal operating range, it can also be said that it is time to backwash the pool.
Depending on the factors listed earlier, you can decide to create a schedule for how often your pool should be backwashed.
Although it is generally advisable that you backwash your pool at least once every month.
ten
Should you turn off pull pump during storm?
When storms happen, thinking about your pool or swimming is the last thing that is likely to come up on your mind.
So, it is good to pay attention to the weather forecast and make an assumption of when it’s likely to be stormy or not, so that you can unplug your pump or turn it off.
If your pump stays running during a storm, it is likely to suffer motor and electrical damage.
Should I drain my above ground pool after it rains?
Draining your pool completely is a drastic decision to take when it rains, especially when there are other options.
Draining your pool completely takes away all the chemicals you might have applied to keep the pool safe. Not just that, hydrostatic pressure from such action can cause your pool to come out of the ground.
The best thing to do in such a situation is to lower the water level and bring it back to normal.
