How long can you leave water in an inflatable pool with chlorine?

No water changes are required with chlorinated pool water. To avoid the growth of bacteria that could be harmful to swimmers, it is recommended to empty and refill smaller inflatable pools every two to four days if they are not sterilized.

If you have access to municipal water, it has already been treated with a measured dose of chlorine for sanitation purposes. If that’s the case, the amount of additional chlorine in the water will determine how long you can wait before replacing it (five days to a week).

When draining and refilling the pool, use a sanitizing wipe like Lysol or a rag dampened with water that has been disinfected with bleach. 

What Happens If You Leave Water In A Kiddie Pool For Too Long?

The chance of contracting a recreational water disease, which can include stomach cramps and diarrhea, increases if pool water is left out for too long or if the pool is not cleaned properly between usages.

Be thankful you haven’t heard of “recreational water illness” if you haven’t heard of it before. The word is used to describe the unpleasant insects that can be picked up at water-related destinations such as public pools, beaches, and water parks. No matter how hard you try, it will happen at some point throughout your child’s childhood, and it will be awful.

Shigella and E. coli are the causative agents of these diseases, and they are highly contagious. This is especially true when children drink from kiddie pools or otherwise come into contact with the water. When more than one kid uses the pool at once, there’s a much higher chance that everyone will get sick.

How Long Is Too Long To Wait Before You Dump The Water?

Your kiddie pool’s water should be changed after each usage, even if you’ve followed all the essential safety measures beforehand. It is recommended that you wait for at least 4 hours after draining your pool to refill it, during which time you should give the pool a thorough cleaning, let it air dry, and then place it in direct sunlight.

It is not unusual to find covers on kiddie pools that have been left in the open overnight. However, does the use of a cover affect the length of time that the water can remain in the pool without risking contamination? Unfortunately, the safe retention duration for water in a kiddie pool does not improve with the use of a tarp cover.

The Centers for Disease Control and Prevention (CDC) also warns against the common practice of employing chlorine tablets to maintain sanitary conditions in kiddie pools, as this method is not a “practical” way to eliminate disease-causing microorganisms.

If you’re tired of emptying and refilling a kiddie pool every day, you might want to consider upgrading to a larger pool equipped with a filter. According to CDC recommendations, inflatable and kiddie pools of medium and larger sizes that cannot be drained daily should be equipped with filters and adequate disinfection equipment. Therefore, it may take more work, but less water will be wasted.

How do I keep my inflatable pool water clean naturally?

Pool placement is crucial, so give it some thought.

Situating is key! Pick a spot in your yard that doesn’t have any nearby trees. Even if it’s not fall, leafy trees will start shedding their leaves, pine trees can cause their own issues, and we have to deal with birds nesting in the branches. We also advise keeping it away from any play areas with sand.

Find a bucket to use as a rinsing station.

If you want to take extra precautions against bringing dirt and grass clippings into the pool on your feet, fill a medium-sized dishpan basin with clean water and set it down near the pool.   

A skimmer net for your pool is a must.

Your pool is susceptible to contamination from debris such as bugs, leaves, and dirt. Getting rid of that issue in a very short amount of time and with minimal effort can be accomplished by purchasing an inexpensive pool skimming net. Remove the unwelcome visitors promptly as they arrive. Just make sure it serves its purpose. Alternatively, you might use a soup strainer, which can be found at any store that sells swimming supplies.

Use a sponge that can soak up oil.

If you want to keep the water in your inflatable pool free of oils (such as those found in sunscreens) and sweat, another popular method is to make use of an oil-absorbing sponge. The oils in your pool, whether floating on the surface or settling to the bottom, are no match for these specialized oil-sucking sponges.

Pools should be drained, cleaned, and dried after each use.

This is the single most crucial piece of advice presented here. When not in use, your inflatable pool should be drained, rinsed, dried, and deflated. The first step in ensuring the safety of children and pets around a pool that isn’t in use is to drain and deflate it. Unattended water poses a serious danger to children, animals, and wildlife. It is never acceptable to abandon a swimming pool full of water.

Pools that aren’t treated with chemicals by leaving the water to sit around can eventually get “slippery” on the bottom, but rinsing them after every use will prevent this.

When rinsing your pool, use a mild dish soap.

If there are stains in your pool that regular hosing doesn’t remove, you can typically get rid of them with some mild dish soap and a towel. Cleaning your pool with chemicals will ruin the PVC and the printing. If you want to keep it mildew-free between uses, just give it a good rinsing with water and then let it dry fully before storing it away.

Can you put chlorine in an inflatable pool?

For several reasons, it is not a good idea to disinfect the water in small inflatable pools  by adding bleach or pool sanitizer 

Splashing and spilling can waste a lot of water very rapidly, making it difficult to judge how much disinfectant should be added.

They lack filters that can collect detritus like dirt, leaves, or skin cells that can eat away at disinfection and prevent it from doing its job.

Germs have a greater chance of spreading rapidly in pools that are made of inflatable or plastic material because the water does not contain any disinfectants.

Larger pools made of plastic or inflatables will need to be filtered, and they will also need to be disinfected. To keep everyone healthy and avoid the spread of disease, it’s important to filter and disinfect these pools as directed by the manufacturer.

How do I safely manage my backyard inflatable pool?

Estimate how much water your pool can hold. The quantity of pool chemicals that have to be added to treat your pool will be determined by the amount of water that is currently present in your pool. You may find online calculators to help you determine the size of your pool. Do you know how to use the filter and the sanitizer that came with your pool? Always refer to the manufacturer’s instructions. Kiddie pools with a diameter of 3 to 5 feet do not require any special treatment as long as they are emptied every day. The CDC in the United States provides useful maintenance recommendations.

Decide on a pool cleaner. To disinfect your pool, use the product suggested by the manufacturer or seek advice from a pool supply retailer. In order to keep the chlorine in pool disinfectants from deteriorating in the sun, many of them also contain a stabilizer. Products are available to assist regulate the pH level of pool water. If you want to add chemicals to your pool water, how much should you add? A pool calculator is just one of many online tools that may help you determine how much of each chemical you’ll need based on the size of your pool and the necessary dosages. 

Choose a pool water testing strategy. Water chemistry in a backyard pool can be easily monitored with the help of color test strips. You can monitor the pH and chlorine levels (“total” and “free”) in your pool with the use of test strips. On the other hand, you might utilize a pool test kit.The free chlorine level in pool water should be between 1 and 4 parts per million, and the pH should be between 7.2 and 7.8, as mentioned up top. 

Based on your findings, alter the pool’s chemical levels accordingly. The Centers for Disease Control and Prevention refer to chlorine and pH as “Your Disinfection Team” for safeguarding recreational water. These two chemical variables are the first line of defense in preventing illness from aquatic infections. Pathogens in water can be eliminated with the help of free chlorine. The optimal range for a pool’s pH, where chlorine is most potent against disease-causing organisms, is from 7.2 to 7.6. Additionally, swimmers can relax at that temperature range. When a pool is heavily used, the CDC advises checking the chlorine and pH levels more frequently. 

Pools need occasional shock treatments. A shock oxidizer, either chlorine-based or chlorine-free, can be used to neutralize the combined chlorine in a water supply. Shocking the pool is also useful for removing waste from swimmers and algae blooms. When total chlorine concentrations are greater than 0.5 parts per million, shocking is required. When a pool is shocked, the disinfectant level is increased by 10-20 times the normal combined chlorine level. Before the free chlorine level returns to 1–4 parts per million, the pool should be closed to swimmers. Applying pool shock at night can be helpful since it gives the free chlorine in the water time to decrease as you sleep. It’s important to note that chlorine decreaser (thiosulfate) can be purchased from pool stores in order to fast lower chlorine levels. When shocking your pool, be sure to always follow the manufacturer’s instructions.

Leave a Comment