Can You Put Chlorine Granules In A Floater (Floating Dispenser Or Feeder)?

Can You Put Chlorine Granules In A Floater (Floating Dispenser Or Feeder)?

So, now it’s clear that to sanitize your swimming pool, you need to add chlorine. Having known all the positive effects of chlorine on your pool, you take the big step towards purchasing chlorine, and now it’s time to administer it into the pool.

And here’s where the confusion starts. You wonder how it can be properly applied to the pool, and I guess this is why you’ve come here. You need to be well informed before you start using chlorine granules in your pool.

Before we go further, let’s answer the question. Chlorine floaters are basically designed for chlorine tablets. If you have purchased chlorine granules because of the current scarcity of chlorine tablets, don’t put the granules in your floating dispenser.

Chlorine helps kill and prevent algae growth, bacteria and other contaminants in your swimming pool.

But there are three forms: chlorine granules, liquid, and tablet. The majority of pool owners use tablet forms of chlorine, while others use granules, but the goal remains the same: to sanitize the pool and keep it clean and hygienic for use.

It is a fact that it is very important to take note of the fact that you should never apply chlorine granules to your pool through the floater dispenser or feeder. When you’re adding granules, spread them evenly over a wide area in the deepest part of the pool and not in the floater or feeder.

If you find some portion of the chlorine granules have settled on the bottom of your pool, use a long-handled pool brush to disperse them. This is to prevent your granules from bleaching your pool liner or causing any damage.

Where do you put chlorine granules?

Chlorine is a necessary sanitizer which is used in the destruction of bacteria and other pathogens. Chlorine can be gotten in different forms; they are granule, stick, tablet, and liquid. In this blog post, we will show you where you can put your chlorine granules to sanitize your swimming pool.

Granular chlorine can be applied to your swimming pool either by broadcasting it over your pool or through the skimmer. Dichlor chlorine is small-grained and quickly dissolves, so it is not necessary, dissolve it in water before adding it to the skimmer. Cal-hypo chlorine normally comes in large grains, so it has to be dissolved in water or it could bleach your pool lining.

How to mix chlorine granules with water:

  1. Put on your goggles and gloves.
  2. Half-fill your bucket with warm water. Add the calcium hypochlorite to the water. Add at least 1-2 pounds, depending on the size of your pool.
  3. Using a wooden stick, stir the granular chlorine and water together. Ensure you do not breathe in chlorine vapors.
  4. Turn on the pump. This will help the chlorine circulate appropriately to all the corners of the pool.
  5. Allow 3–4 hours for the chlorine to circulate before using or swimming in the pool.

Can you put chlorine granules in a floating dispenser (feeder)?

Owning a pool comes with responsibilities, and one of these responsibilities is to keep your pool clean and clear. To keep your pool clean, you would have to administer chlorine to help kill bacteria, algae, and other pathogens that might be present in the pool.

The method of administering chlorine to your pool is one important process to be familiar with. The form of chlorine to be administered will also determine the method of administration.

It is generally advised to not apply chlorine granules to your pool through a floater dispenser as it can damage your pool liners. Rather, spread it evenly over a wide area.

There are four different forms of chlorine, which are: liquid, tablet, granular, and stick form.

Let’s quickly look at some of the ways you can apply chlorine to your swimming pool.

  1. Swimming pool skimmer: Add the chlorine to your skimmer, and ensure your filter is running so that water will quickly move over your chlorine tablets, dissolving them effectively.
  2. Automatic swimming pool chlorinator: An automatic pool chlorinator is the best way to administer chlorine into your pool. You can load it up with chlorine tablets and set it for a chlorine level of 1 ppm to 3 ppm. You can always keep verifying the level by testing the water till it reaches your ideal level.

How do you use chlorine granules in pools?

Being a pool owner has to do with a lot of choices. You have to decide whether to use chlorine or salt water. A manual vacuum or a robotic cleaner? Liquid or granules of chlorine?

It all depends on what you want and what you choose to stick to in the long-term maintenance of your pool. As we move on, we’ll be looking at the differences between granule and liquid chlorine and also how you can use liquid chlorine.

Chlorine is the most familiar sanitizer among pool owners. It’s very effective in killing and preventing bacteria, algae, and other contaminants in the swimming pool.

Let’s quickly look at the differences between liquid chlorine and granule chlorine.

Liquid chlorine: Liquid chlorine, as the name implies, is a liquid form of chlorine. It can easily be administered into the pool water. All you have to do is to pour it directly into the water.

Liquid chlorine is produced by bubbling the gas form of chlorine through caustic soda, and it has a pH of around 13. Liquid chlorine is normally used in commercial or pools with lots of swimmers because it can be added in large amounts.

Liquid chlorine needs more acid to be added to the water to counteract the high pH level. Liquid chlorine is also known to be very corrosive because it could damage your pool walls and other surfaces if not applied carefully.

Chlorine granules: chlorine granules, which are also referred to as powder. Chlorine dioxide is another form of chlorine mainly used by private pool owners. Chlorine granules are quite expensive compared to the liquid type, and they can be easily administered too.

Granules are low in pH level, which means you don’t have to spend extra money on acid to balance your water’s pH level.

They are normally available in two types: dichlor and calcium hypochlorite.

Also, let’s take a look at the ways to apply chlorine granules through the skimmer.

  1. Turn on your pool’s pump and allow it to circulate and blow out the air in the lines.
  2. Make sure you wear your gloves and goggles because the fine grains can itch and irritate your skin and eyes.
  3. Take off the skimmer cover and add the needed number of chlorine granules to the skimmer. 4. Be careful so it doesn’t pour on to the pool tile.
  4. For proper circulation, cover the skimmer with a skimmer cover and run the pool for at least 3–4 hours before swimming.

How long can you swim after adding chlorine granules?

The feeling of finally sanitizing your swimming pool after it has been attacked by contaminants is a feeling almost all pool owners can relate to. But then, after sanitizing the pool, comes the need to put it to use.

You’ll get to know the accurate time frame to wait before using the pool very well, and you’ll get to find out as you stay with us.

Wait for at least four hours before going back to using the pool after applying chlorine. However, the ideal time is to allow the complete turnover of the water through the filter before using it.

Using the pool without waiting for the appropriate time just after applying chlorine can cause serious health risks. It can itch your skin and irritate your eyes, and it even poses risks to your lungs too.

Is liquid chlorine better than chlorine granules?

Choosing the form of chlorine to use during the sanitizer application phase of your pool can be confusing, but not to worry, we’ll be giving you some major differences between liquid and granule chlorine.

Liquid chlorine, as the name implies, is chlorine in liquid form. It can be applied by just pouring it into the swimming pool. It is less expensive but high in pH level, which will need the application of acid to balance the pH level.

Granule chlorine: granule chlorine is a powder form of chlorine that can be applied by spreading it over a wide area of the pool or through the skimmer. It is more expensive compared to liquid chlorine, but it has a lower pH level, so you won’t need to add acid to balance the pH level after administration.

Now, having known the differences, it is left to you to decide which to use.

Share this

Leave a Reply

Your email address will not be published.