Can I Use Vinegar In A Hot Tub? Yes, Here Is How

The use of vinegar in spas is not a new thing. People have been using vinegar for years now. If you are wondering whether you can use vinegar in your hot tub? Yes, vinegar can be used in a hot tub as a cleaning agent. Though it is not the best chemical for your hot tub, it can be used in a hot tub.

Some people even use vinegar to adjust pH levels in their hot tub. You can use vinegar to eliminate harmful bacteria from your hot tub. Vinegar can help you clear water spots and prevent the clogging on your hot tub jets.

In case you do not know what it is, vinegar, according to Wikipedia, is an aqueous mixture of acetic acid and trace chemicals that may include flavorings. It is cheap, non-toxic, and Eco-friendly. The acetic acid composition varies depending on the purpose for which it is manufactured and the source material.

It is used for a variety of purposes including cooking; to add flavor and to preserve foods, and also as a household cleaning agent, which is our main concern today. Some vinegar popularly used in various homes include;

  • Apple cider vinegar
  • White vinegar
  • Red wine or white wine vinegar
  • Balsamic vinegar

Vinegar is an all-purpose cleaner and therefore can be used to clean hot tubs. White distilled vinegar made from grain and water and normally having an acidity of 5 percent is preferred for cleaning as it is colorless and will not leave stains on the tub after cleaning.

Due to its acidic nature as a result of the acetic acid presence, vinegar is able to kill bacteria on surfaces, dissolve dirt, grease, and other mineral deposits.

Is Vinegar safe for hot tubs?

Vinegar is purely made from fermenting natural materials which we use on daily basis. Materials like fruits, grains, beverages, or products which contain alcohol, like wine, beer, and rice. Some are even made from beech, which is a product of wood. And as such vinegar is safe for cleaning hot tubs.

How much vinegar should I put in my hot tub?

Depending on the size of your hot tub, the amount of vinegar required for cleaning might vary. Using too much or too strong solutions of vinegar might be harmful to the tub surface and change the nature of the water in the tub completely. So one gallon of vinegar in your hot tub water is dilute enough for cleaning.

Just like other household cleaning agents diluted in water, allow soaking for a while, preferably for 1 – 2 hours with the hot tub running so that it mixes thoroughly and does what it is meant to do. Now use a piece of cloth or a sponge that has been soaked in undiluted vinegar solution and then wipe the outer edges and sides of the hot tub where the water.

For a more effective result, allow for like 5 minutes after wiping before rinsing off with water, preferably warm water. This will allow time for the active components in vinegar to act on the dirt just like soap.

Can you use vinegar to lower pH in a hot tub?

Adding vinegar to your hot tub can safely and effectively lower the pH level. And not just that, it also helps to clean the tub. Two for one I would say. Although using vinegar is not as effective in pH reduction as pH reduces, it sure does the trick if used properly.

Some vinegar solution leaves the water in the tub colored and smelly, so it is recommended that you use white vinegar which is an acetic acid solution made from grain and water.

However, since vinegar contains 5% of acetic acid in solution, it is what we refer to as a “weak acid”, and is very very mild. It sometimes creates a secondary buffer in the water by adding acetates to the water, which overall is not very desirable. So unless, you don’t have any other option, using pH reducers would be a very good idea.

What can I use to clean the inside of my hot tub?

Once you have stated, your hot tub is going to need cleaning on a timely basis if you want to keep getting the desired satisfaction for which you bought it in the first place. Whether it is in use or not, over time dirt and other unwanted particles would accumulate and thus the need to clean your hot tub.

Things like stains, grease, slime, odor, etc will have to be eliminated to have a clean tub. There are a wide variety of substances that can be used to clean the hot tub, some targeting specific kinds of impurities and others being for all-purpose. Below are some types of cleaning agents or substances that can be used to clean inside the hot tub.

  • Acids: These target very tough stains in the water and helps to stop and break down rust and rust stains on the tub surface. The most common one is vinegar, which is an aqueous solution of acetic acid.
  • Bases: Regarded as all-purpose cleaners and, they remove dirt including fat and grease.
  • Detergents: If you are having sticky stains in your tub, detergents will do the trick for you. They dissolve the oil that sticks dirt to surfaces.
  • Sanitizers: These groups of cleaning agents not only remove stains but also take care of odors in the hot tub. They act as disinfectants to remove dirt and kill germs and other organisms that might be in the hot tub. Chlorine bleach is an example of cleaning substances that can be called sanitizers.

Can you use baking soda in a hot tub?

Baking soda, also known as sodium bicarbonate, is an important substance in the world hot tubs and hot tub maintenance when it comes to controlling the total alkalinity level and the pH level of water in the hot tub.

It is okay to use baking soda in your hot tub and it is used as an active ingredient in many commercial hot tub and pool products. So you might have used baking soda in your hot tub without knowing, therefore there is no need to worry about using it again.

What does baking soda do to hot tub water?

Baking soda, or sodium bicarbonate, might sound like sodium bisulfate but is the opposite of it. baking soda has natural alkalinity and a pH level of 8. Thus, Baking soda when added to water in a hot tub increases the total alkalinity and pH levels of the water in the hot tub. Baking soda does not lower the alkalinity of water.

For water to have lower alkalinity, it means the ability of the water to break down acids is reduced. Baking soda has a very high alkaline pH level and will only add to the present alkalinity of water in your hot tub rather than remove it from it.

Baking soda helps in keeping the hot tub water clean and clear since a stable ideal TA and pH level would prevent certain impurities from accumulating in the water.

Can I use Windex to clean my hot tub?

For purpose of cleaning surfaces, Windex is suitable to be used as a cleaning agent for cleaning your hot tub. Like most surface cleaners, it is made by combining solvents, detergents, and fragrance, and therefore perfectly dissolves and remove oily stain/films, dirt, and other forms of impurities on the surface of your hot tub.

However, one has to take care when using to ensure the cleaning agent is properly wiped off with the dirt, as residues might react with the dirt or other hot tub chemicals and solidify on the surface into a gritty film on the shell of the hot tub. And this can give rise to another issue, creating discomfort and thus requiring another cleaning.

So extra care like, rinsing with a hose to loosen the remaining cleaning agent after the initial wiping, and wiping again with another soft cloth, can be taken to prevent this.

Can I use dish soap to clean my hot tub?

Yes, you can use dish soap to clean your hot tub. The hot tub in a sense is more like an extremely large dish filled with water. So if dish soap works for cleaning your dishes, it can do well in the big leagues too. Except for removing tough stains, of course, dish soap is made of mild cleaning ingredients, and thus you will require a more harsh cleaning agent if you want to get rid of tough stains.

The downside of using dish soap for cleaning your hot tub is the fact that it can leave a soap film on the hot tub surface, and this, in turn, can cause the water in your hot tub to be foamy when next you refill. This can be prevented by properly rinsing off completely the dish soap residue after cleaning.

Since dish soap is a base, vinegar, which is acidic, and hot water would perfectly do the job in completely neutralizing and removing any dish soap residue left behind.

How do you clean a hot tub without draining it?

There are few ways to clean a hot tub without actually draining the water out, but it is recommended you drain and clean your hot tub every 3-4 months and replacing with clean water if you want to do a proper job when it comes to maintaining a clean hot tub. Fresh clean water would pose no threat to your hygiene and is quite easier to be filtered and cleaned.

Parts of the hot tub that are recommended to be cleaned without draining are the parts that are not submerged in the water. The steps, the sides of the hot tub shell, the headrests, and other external areas not within the water-filled area of the hot tub can be wiped clean regularly with surface cleaners, without affecting the water within the hot tub.

Since these parts are areas where people come in contact with the most when using the hot tub, they are major contamination source for the other parts of the hot tub, and cleaning them regularly would help in keeping the dirt or contamination from spreading to the water-filled part of the hot tub.

Hot tubs are designed to self-clean the water it contains; this is what the filtration system of the hot tub does. It filters and removes dirt and contaminants from the water as it circulates in the tub. This combined with the use of chemicals to clean and control the TA and pH levels of the water your hot tub will keep it in good shape till the next time total drainage is due.

However, if the tub itself is dirty, draining is highly recommended to be able to apply appropriate cleaning agents and remove the tough stains on the surface, else you will end up contaminating the entire water in the hot tub into a mixture of cleaning agents and impurities.

What can I use to clean my hot tub filter?

The hot tub filter does the work of keeping the water in the water clean and free of debris, dirt, and other filterable contaminants. Over time, it gets very dirty from accumulating and holding contaminants that would have entered the water in the hot tub. If not cleaned, the hot tub filter fails to function properly and begins to filter less and fewer contaminants.

Meaning more and more debris gets to flow past them into the water in your hot tub and makes it dirty and unhealthy for use. A dirty hot tub filter might also be a breeding ground and a source of contamination to your hot tub instead of helping to clean it.

Cleaning the hot tub filter, one has to be very careful as you do not want to end up damaging it in a bid to clean it. Do not use scrubs but rather use hot tub filter cleaners to clean your hot tub filter. It should be mild, that is dilute the cleaner if it comes in a concentrated form, as very harsh chemicals might eat up the filter material.

Also, you can use your garden hose to flush your hot tub filter with high-pressure water to wash away the debris contained in it. This should be done weekly to stop too much accumulation of contaminants.

Do not use bleach as a cleaner for soaking your hot tub filter. Bleach might be effective in killing germs on the hot tub shell surface but is very harsh and will cause damages to the material which the hot tub filter is made of, thereby reducing its effectiveness and life span.

Do not use dish soap and other household cleaning agents that foams in cleaning your hot tub. The filter is a bit absorbent and would soak it up leaving residues no matter how well you rinse. This will spill soapy foam in your water during refill.

Leave a Comment